摊位填料
为奶牛提供极致的舒适, dairy producers should frequently maintain deep-bedded sand freestalls. The 菠菜网最稳定正规平台_最全菠菜网大全摊位填充物 is designed to handle sand bedding and provide trouble-free operation.
下载手册
摊位填料 are available in either a truck- or trailer-mounted unit. They include controls that are mounted inside the cab in close proximity to the operator, which allows the driver to concentrate on operating the Stall Filler and placing the sand in the proper location in the stalls. The electronic over hydraulic design eliminates many hydraulic hoses and fittings, 减少复杂性和维护.
摊位填料 are used to replace sand bedding in freestall dairies. They can also be used to spread sand on construction sites. They are designed using a variety of wear-resistant material to give it a long life under harsh conditions.
摊位填充物是如何工作的
摊位填料 are used to move and distribute sand bedding in freestall barns as part of the freestall bedding maintenance program. 奶牛挤奶的时候, the freestalls are cleaned and groomed to remove manure and dirty bedding. A Stall Filler can then be used to replace the sand that has either been kicked out by the cows or removed during the grooming process.
Bedding sand is first loaded into the Stall Filler’s hopper. The Stall Filler is either pulled (trailer) or driven (truck) through the freestall barn while the cows are absent. The operator can fill the stalls to the proper levels by adjusting the tractor's rpm and belt speeds. Depending on the size of the barn, several trips may be necessary to get all the stalls filled.
为什么是菠菜网最稳定正规平台_最全菠菜网大全摊位填充物
菠菜网最稳定正规平台_最全菠菜网大全摊位填充物s were designed and built specifically for sand bedding. Every component has been designed and chosen for long life under severe and abrasive use. The hopper is mounted on a heavy axle assembly that uses standard truck tires for quick and easy maintenance. The hopper discharge belt is superior to other chain type systems for providing better service life under abrasive working conditions. The belt is supported by a series of mining duty undercarriage rollers. The hydraulic system is self-contained and driven by the tractor PTO. 电气控制, 位于拖拉机或卡车驾驶室内的, 调整卸料带的速度和方向. This allows the operator to place the sand w在这里 it’s most needed in the stalls. The high-speed discharge belt is driven by shaft-mounted urethane wheels supported by outboard bearings.
摊位摊贩的FAQs
向专家请教You will work with our team of engineers to determine if the truck you have will work with the Stall Filler or not. 你需要考虑的一些事项包括:
- 床的长度必须在16英尺以上.
- The frame should have a width of 34” when measured from outside to outside of each frame rail.
- 载重量必须大于等于35,000磅.
- The ability to power a hydraulic pump run off the transmission with a PTO, 或直接从发动机(从曲轴上驱动).
- 液压泵. This must have the provision to be shut off (driven off the transmission) or the provision to bypass oil back to the reservoir without pumping it through the valve (crankshaft driven) when the Stall Filler is not operating. The pump can be disengaged with a PTO that can be shifted in and out of gear or with some type of clutch mechanism. Oil can be bypassed around the valve with some type of plumbing. If the above provisions are not made, the hydraulic oil will overheat. The hydraulic pump must also provide 24 gpm at 3,000 psi for operating the Stall Filler.
- 12VDC电源可为控制箱供电.
When the Stall Filler is full of sand, it will weigh between 30,000 and 40,000 pounds. The tractor will need to be able to handle this weight and have the horsepower necessary to drive the hydraulics. 我们推荐一台至少60马力的拖拉机.
These 摊位填料 will fit in most modern freestall barns. Occasionally, barns are built with alleys that are too narrow. A drawing that shows the major dimensions of the Stall Filler can be found 在这里.
是的，多台机器已经运到海外了. 为了能装进集装箱, the Stall Filler needs to be partially disassembled and reassembled once delivered.
The main hopper conveyor assembly uses a heavy-duty belt supported with bed rollers. This is the same kind of design that is used extensively with conveyor systems to move sand and gravel, 是磨料材料的最佳选择. The discharge conveyor uses a continuous cleated belt, similar to what is used to drive a snowmobile. The underside of the belt has drive cogs that match up with the cogs on the drive wheels. We use our own urethane drive wheels, not plastic or metal wheels. The urethane wheels and outboard bearings provide a long service life despite being inundated with sand.
摊位填料 are used to replace sand bedding in freestall dairies.
特性 & 好处
- 卡车或拖车安装的失速填充装置可用
- 在8到10码之间撞平
- 可调料斗和卸料带的速度和方向
- 独立液压系统驱动拖拉机PTO
- 整体液压泵
- 车载失速填充器的后排放
- 安装在拖车上的失速填充物的前排放
- 包括电动液压控制
- Urethane wheels support and drive discharge belt for reduced wear and long life